TOA A906MK2 8-Channel Mixer Power Amplifier

• Power Requirement: AC mains, 120 V, 60 Hz
• Power Consumption: 100 W
• Output Power: 60 W RMS
• Power Band Width: (D) 20 〜 20,000 Hz, 0.5% THD, (T) 50 〜 20,000 Hz, 0.5% THD
• Frequency Response: (D) 20 〜 20,000 Hz, ±1 dB
• (T) 20 〜 15,000 Hz, ±1 dB, (T) 20 〜 20,000 Hz, +1 dB, -3 dB
• T.H.D: 0.02% at 1 kHz, rated output
• Inputs: Eight Input Ports: Each port accepts any input modules.
• One Bridging Input/Output
• Input Sensitivity /Impedance: Input Port #1 to #8 : 100 mV/10 kΩ
• Bridging Input/Output: 100 mV/3.3 kΩ
• Preamp OUT /Power Amp IN: 1000 mV into 600 Ω/1000 mV, 10 kΩ
• Outputs(T)=Transformer (D)=Direct: Main (T) : 8 Ω, 25 and 70 volts, balanced, Main (D) : 4 Ω, unbalanced; Aux : 10 kΩ, 1 V
• Output Regulation(1kHz): (D) Less than 0.5 dB, no load to full load
• (T) Less than 1.0 dB, no load to full load
• S/N Ratio: (Band Pass 20 〜 20,000 Hz) Tone defeat switch on
• Master volume min 90 dB
• Master volume max: 77 dB
• Power amplifier only: 105 dB
• Tone Controls: Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
• Controls: 8 Input gain control 1 Master gain control 1 Bass control
• 1 Treble control 1 Power ON/OFF switch 1 Tone defeat switch
• 1 Low-Cut switch (60 Hz, 6 dB/octave)
• Indicators: 1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED
• Protection: Self-protection, with AC fuse (inside)
• Connectors:
• Input No.1 to No.8: Card-edge connector
• Bridging, Mixer preamp. output, Power amp. input, Aux output: RCA phono jack
• Output: Screw-terminal strip
• Mute, Remote VR: Screw-terminal strip
• AC outlet: 3-pin grounding type
• AC power cord/plug: SJT, 3-prong type
• Temperature Range: -10℃ 〜 +60℃ (12゜F 〜 140゜F)
• Accessories: Volume control cover (YA-920) - 4
• Option: Rack mounting bracket (MB-25B)

• Dimensions:  16.54 x 3.9 x 14.09
• Weight:          21.16 lbs

Download Spec Sheet

Download Manual